Forum network switch upgrade

This is the final report for Project 442 - Forum network switch upgrade


1. Introduction

The aim of this project was to replace all existing HP Procurve 2610-48 10/100 Mb/s switches (plus a couple of 2620-48 switches) on the data network with more modern Aruba 2530-48G 1Gb/s switches. The total number of switches to be replaced was 55; the number of network closets involved was 17.

2. Outcome of the project

All existing HP Procurve 2610-48 10/100 Mb/s switches were replaced; the Forum edge data network is now composed entirely of 1Gb/s switches.

3. Discussion

This project was a joint effort between several members of our Computing staff, and several members of our Technical staff. There are generally no technical 'gotchas' in a project like this, but there is significant planning involved, a great deal of pre-configuration to be done, and the entire thing then relies on coordinating the efforts of several members of staff, all of of whom of course have other constraints on their time.

The switch replacements done in the course of this work were not literally like-for-like: in particular, a complication was that the new 2530-48G switches have fewer available uplink ports than do the older 2610-48s. (See the planning wiki page for the detail on that.) That required some repatching of every existing 2610-48 switch before work could commence on the upgrade itself.

The work of configuring the 55 new switches in advance of their final installation was jointly shared by ID and JO. We found that, once familarity had been gained, we could expect to completely configure one switch in something like 30 minutes. (The work of 'configuration' covers the entire process of unboxing the switch; physically setting it up; connecting it to our network and logically setting it up - including upgrading the firmware; and then finally reboxing it for transport to its destination closet.) But this is hypnotic work and, for similar efforts in future, one might want to budget for configuring no more than about six switches in any one day.

For similar efforts in future it would be possible to parallelize the configuration work by using multiple switch installation LCFG profiles (we shared a single such profile), but a limiting factor is physical space: we don't have a dedicated server preparation area, so the most convenient place for the work was the Forum server room itself - and setup room in there is limited.

Our Technical staff are very busy: dealing with building issues, and dealing with the ramifications of the continual upgrade works to the Forum (e.g. the '3 for 2' conversions) eats up their time. We finally managed to coordinate time for the Techs to schedule the installation of the new switches in the closets starting in about February 2018, and we are very grateful for their help; however, had the Techs been less inundated with work, we could have completed this network upgrade sooner (we took physical delivery of the new switches in mid-2017.)

4. Lessons learned

5. Effort

6. References

  1. Project entry on
  2. Project home page
  3. Wiki page for planning, organization and progress tracking
  4. Computing systems blog announcement

-- IanDurkacz - 22 Jun 2018

Edit | Attach | Print version | History: r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 22 Jun 2018 - 15:13:42 - IanDurkacz
This site is powered by the TWiki collaboration platformCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback
This Wiki uses Cookies